AgrarElast – Joint sealant

Technologien und Beratung für den Betonbau - B.T. innovation

Sealing of silage clamps in JGS plants (animal faeces, slurry, manure, silage juice) with AgrarElast

What does this product have to offer?

AgrarElast is used to seal storage and filling facilities with substances generally hazardous to water. Due to new legal environmental regulations, especially the regulation AwSV (Ordinance on Installations for the Handling of Substances Hazardous to Water, effective since August 1st, 2017), silage clamps must be specially sealed.

Your advantages

Product details

For the renovation and new construction of facilities for the storage and filling of liquid manure, slurry and silage leachate (JGS) – mobile silos, fermentation feed silos and solid manure plates – as well as biogas plants, only construction products may be used that have the corresponding building authority approvals.

In order to meet the high requirements for the permanent sealing of JGS plants, the joint sealant AgrarElast is subject to regular product monitoring and material testing. In addition, AgrarElast is a joint sealing system approved by the DIBt building authorities (Z-74.62-176).

The newly developed product from BT innovation can thus be reliably used for sealing joints in JGS and biogas plants. AgrarElast is a sealant for sealing microbiologically and acid contaminated joints, for areas with composting and fermentation processes. The system can be used to seal silos, warehouses, concrete solid manure slabs and asphalt. The system is suitable for movement joints and is characterised by high temperature resistance.

The AgrarElast joint sealing system consists of the AgrarElast joint sealant and the primers A(sphalt) for asphalt and B(eton) for concrete. Primer A is suitable for asphalt, asphalt concrete and bitumen. This product is a set consisting of components A+B.

Primer B is suitable for concrete, metal and glass, among others.

Areas of application for AgrarElast

Instructions for professional waterproofing

AgrarElast Anleitung Anwendung

Technical information

* measured at 23°C and 50 % rel. Humidity

Primer A(sphalt) is a 2-component epoxy primer for the pre-treatment of bituminous substrates when joint sealing with AgrarElast. As a pre-treatment agent for asphalt surfaces, it is a component of the approved AgrarElast waterproofing system (approval Z 74.62-176).

Primer B(eton) is a 1-component primer for the pre-treatment of various substrates when using the sealant AgrarElast. As a pre-treatment agent for concrete surfaces, it is a component of the approved AgrarElast joint sealing system (approval Z 74.62-176).

Observe the hazard and safety information on the safety data sheets of the AgrarElast and the primers.

Areas of application for AgrarElast

BT sealing products

In addition to the AgrarElast, BT innovation has a wide range of products for durable Joint sealing of precast concrete and in-situ concrete components in agriculture or against pressurised water. Only some of the work on JGS and biogas plants requires construction products with DIBt approval. 

AgrarElast: joint sealant for JGS and biogas plants approved by DIBt since June 2019.

Agrar-SynkoElast finds application in the sealing of storage and filling facilities with substances generally hazardous to water, such as e.g. JGS and biogas plants, slurry tanks, mobile silos, fermentation feed silos, waste water plants. Agrar-SynkoElast is a joint sealing system approved by the DIBt building authorities (Z-74.51-184).

InnoElast® Type 2: tested joint sealant for joints between concrete components, with which subsequent sealing is possible up to a water depth of 4.8 .

SynkoElast®:  Tested construction joint tape for in-situ concrete, with which sealing up to a water depth of 20 m is possible. In combination with the SynkoElast® crack profiles, closed seals can be safely created in cast-in-place concrete construction. DIBt approval for JGS and biogas plants has been applied for (application no.: II 71-1.74.51-67/18).

RubberElast®:  Tested joint tape for fast and secure sealing of even complex precast concrete joints up to 5 m water depth. DIBt approval for JGS and biogas plants has been applied for (application no.: II 71-1.74.51-72/18).

MultiElast:  New tested joint tape for precast concrete elements and in-situ concrete, with which precast elements of 10m can be 

ProElast®-System: Tested waterproofing system for waterproof concrete made of foil and foil adhesive, ideal for subsequent waterproofing against up to 20m .

Other products from the sealing technology category

Agrar-SynkoElast Teaser

Agrar-SynkoElast – joint tape

AgrarElast Produktbild

AgrarElast – Joint sealant

FlaechenElast Anwendung Teaserbild

LiquidElast®

ProElast Referenzen 3

ProElast® system

innoElast Keyvisual

InnoElast® – Joint sealing

MultiElast Produktbild

MultiElast – Joint tape

RubberElast Produktbild

RubberElast® – Joint tape

SynkoElast

SynkoElast® – Joint tape

RubberElast Produktbild

Agrar-RubberElast – joint tape

RubberElast Produktbild

BasicElast – Joint tape

Scroll to Top